Homemade Penis Pump | DIY Penis Pump Guide

What is a DIY Penis Pump?

DIY penis pumps are essentially homemade toys that are vacuum erection devices. These toys use air or water to create a vacuum around the penis that draws blood into the organ, resulting in an erection. The process can temporarily increase the size of the penis and maintain an erection, but it’s important to note that the effects are not permanent. Commercially available penis pumps are designed with specific medical standards in mind, including pressure regulation and material safety, which DIY toys often lack.

The concept of DIY penis pumps is not new. In fact, some commercially successful products stem from DIY ideas. Utilizing water to create a more even pressure around the penis, elaborate penis pumps are much more versatile. It’s important to note that just because a product can be made at home doesn’t mean it should be, especially when it comes to use for medical purposes.

Why make your own penis pump?

There are several benefits to making your own penis pump. First, it can save you a ton of money. Commercial penis pumps can cost hundreds of dollars, but DIY versions of penis pumps can be made from affordable materials, many of which are so common that you may have them at home. Additionally, homemade pumps allow you to experiment and see if a penis pump fits your needs and preferences before investing in a professional product. It also provides a discreet and easy solution for those who are embarrassed to buy sex toys in stores or online.

Materials needed for a DIY penis pump

Making a DIY penis pump requires some basic materials that can be sourced from home or purchased at your local hardware store. The components you will need include:

Cylinder

The air cylinder is the most crucial part of the pump as it holds the penis part during the vacuum process. You can use clear plastic bottles or glass cylinders, such as sausage glass. It is important to choose a material that is durable and safe for skin contact.

Vacuum pump

A vacuum pump generates the suction needed to cause an erection. For simple setups, a small vacuum cleaner with a reverse function or a hand pump using a rubber hose can be used. For more complex setups, an electric pump can be used.

Seals and glues

Sealing connections is important to ensure that vacuum is maintained. Duct tape, insulating tape, silicone, cotton pads or gauze pads can be used to create an airtight sealing environment.

Pressure regulation

While commercially available penis pumps include a pressure gauge to monitor vacuum levels, DIY pumps often lack this feature, which can lead to dangerous overpressurization situations. This is why you need to keep an eye on your body at all times.

Homemade Penis Pump step-by-step guide

1. Water Penis Pump

Penis pumps or hydro pumps utilize water pressure to aid in erection. This type of pump is popular because water provides feedback and is more controlled and safer to use.

Step 1

Begin by gathering materials. Place the accordion style mini plunger, hobby knife, waterproof sealant and liquid transfer pump.

Step 2

Use the hobby knife to cut a hole in the handle of the Mini Plunger. Ensure that the hole should be large enough to allow it to fit into the tube of the liquid transfer pump.

Step 3

Insert the tube into the hole, leaving a large enough space for the penis. Secure the tube firmly with a waterproof sealant to ensure there are no gaps.

Step 4

Measure and cut a circle from the kitchen sponge to fit the base of the plunger. Using this sponge will provide cushioning and help form a seal.

Step 5

Cut a smaller circle in the center of the sponge for the penis to pass through.

Step 6

Insert the sponge into the bottom of the plunger and hold it in place with sealant.

Using the penis pump

To use the pump, start by running warm water in the shower. Place the tube of the infusion pump under running water and place the plunger on the penis. Carefully pump water into the plunger until it fills the column, then gently pull the handle to create suction. Hold the suction for 2-3 minutes or until you feel enough pressure. Gradually release the suction by inserting your finger under the base of the plunger. You can repeat the process until you achieve your desired erection.

2. Vacuum penis pump

The vacuum penis pump is another very effective method of getting and maintaining an erection. It works by pumping air from a cylinder that creates pressure to engorge the penis to achieve and maintain an erection.

Step 1

Lay out the materials, including the drill, tubing, and clear plastic jar.

Step 2

Open the lid of the plastic jar and turn it upside down. Drill a hole in the center of the bottom of the jar that is the right size for the size of the pipe.

Step 3

Insert the tube into the hole, leaving the jar exposed for about an inch or so. Secure it with a waterproof sealant, making sure that no air escapes.

Step 4

Cut the foam gasket to the appropriate size dimensions and wrap it around the open end of the jar. This creates a cushion between the jar and the skin.

Step 5

Secure the foam gasket firmly with tape, making sure it covers the inside and outside edges of the jar.

Step 6

Connect the other end of the tube to the pressure pump.

Using the vacuum penis pump

Shave your pubic hair to ensure that a better seal can be maintained between the pump and your skin. Apply an appropriate amount of water-based or silicone-based lubricant to the penis before placing the pump on the penis. After placing the pump in place, begin pumping with the hand pump until enough pressure is felt. Hold the suction for 2-3 minutes before releasing the pump. A penis ring can be used afterwards to help maintain an erection.

3. Quick and easy DIY pump

If you’re looking for a quick and easy method, this version requires minimal materials and effort and is perfect for beginners.

Step 1

Cut a circle from a kitchen sponge that fits into the base of the folding plunger.

Step 2

Cut a smaller circle in the center of the sponge to create an opening for your penis to pass through.

Step 3

Insert the sponge into the base of the plunger.

Using the Quick DIY Pump

You can wet the sponge before putting the plunger on the penis. Carefully push the plunger down and pull back slightly to create suction. Hold the suction for a few minutes before releasing the plunger. This method is less complicated, but it can achieve the desired results.

Safety considerations

While making and using a homemade penis pump is both an economical and discreet option, there are some potential risks. The most important thing is to listen to your body and stop using a penis pump immediately if you experience any physical discomfort or pain. Overuse or improper use of a penis pump may cause your body to develop injuries such as bruising, ruptured blood vessels, or painful ejaculation. If you experience any adverse reactions, you should stop using it immediately and consider investing in a safer and more reliable professionally designed penis pump.

Why commercial pumps are safer

Commercial penis pumps are designed with safety and effectiveness in mind. They are often equipped with vacuum limiters to prevent over pumping and causing bodily harm. The materials used are usually more durable and comfortable, which significantly reduces the risk of penile damage. While DIY options may be tempting, the safety and quality of commercial pumps is a much better long-term investment for those who need to use this tool for an extended period of time.

Final Thoughts

Homemade penis pumps can be an effective alternative to commercial products, are relatively inexpensive, and are a sex toy that can be tried and used without a large financial investment. However, there are risks involved. Remember that health and well-being is always the first thing you need to consider.

If you decide to make and use a homemade penis pump, always proceed with caution and be aware of the potential risks involved. For those who find that penis pumps work well, investing in a product from a professional manufacturer may be a better option to ensure safety and satisfaction.

Remember, your health and well-being are very important. If you have any concerns about using a penis pump, be sure to consult with a healthcare provider first, especially if you are using it for things like erectile dysfunction or other medical conditions.